Thread: minidisplay port almost working on dell xps 15 l521x
hello!
on laptop, there hdmi port , mini display port. have whole bumblebee/optimus thing setup , working great.
far can tell, both hdmi port , mini display port connected intel card, news!
problem is, hdmi port 'just works'. minidisplay port seems detect , possible id monitor (according the xorg.0.log), display tools not seem recognize going on.
using minidisplay port dvi adapter monoprice. same thing below happens if use minidisplayport vga. both work in windows.
here xrandr -q output nothing plugged in:
here xrandr -q output , last couple lines of xorg.0.log hdmi plugged in:code:screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 lvds1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.0*+ 59.9 40.0 *** snip *** 640x480 59.9 vga1 disconnected (normal left inverted right x axis y axis) hdmi1 disconnected (normal left inverted right x axis y axis) dp1 disconnected (normal left inverted right x axis y axis)
when plug mini display port, screen flickers, xrandr -q shows exact same info if nothing plugged in. but, xorg.0.log shows following... same thing hdmi, missing last line! (when run display tool, monitor not show up).code:screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192 lvds1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.0*+ 59.9 40.0 *** snip *** 640x480 59.9 vga1 disconnected (normal left inverted right x axis y axis) hdmi1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 509mm x 286mm 1920x1080 60.0*+ *** snip *** 720x400 70.1 dp1 disconnected (normal left inverted right x axis y axis) , last couple lines xorg.0.log -> [ 19435.331] (ii) intel(0): edid vendor "auo", prod id 237 [ 19435.331] (ii) intel(0): printing ddc gathered modelines: [ 19435.331] (ii) intel(0): modeline "1920x1080"x0.0 136.20 1920 1968 2068 2086 1080 1083 1084 1088 +hsync -vsync (65.3 khz ep) [ 19435.331] (ii) intel(0): modeline "1920x1080"x0.0 90.80 1920 1968 2068 2086 1080 1083 1084 1088 +hsync -vsync (43.5 khz e) [ 19435.496] (ii) intel(0): allocated new frame buffer 1920x1080 stride 7680, tiled
code:[ 19511.024] (ii) intel(0): edid vendor "auo", prod id 237 [ 19511.024] (ii) intel(0): printing ddc gathered modelines: [ 19511.024] (ii) intel(0): modeline "1920x1080"x0.0 136.20 1920 1968 2068 2086 1080 1083 1084 1088 +hsync -vsync (65.3 khz ep) [ 19511.024] (ii) intel(0): modeline "1920x1080"x0.0 90.80 1920 1968 2068 2086 1080 1083 1084 1088 +hsync -vsync (43.5 khz e)
here entire xorg.0.log ->
http://paste.ubuntu.com/5660023/
log xorg.8.log ... optimus/bumblebee stuff has nothing of interest , display=:8 xrandr -q shows single 'screen' @ 640x480
have no xorg.conf file.
uneducated guessing looks x not taking next step , setting things on display port?
just update...
figured out of statements above wrong... here updates:
- xorg.0.log not show being plugged dp1 had thought.... info built-in lcd! know because tried plugging 1600x1200 monitor , exact same thing printed, specs lcd , not specs external monitor.
- tried xorg-edgers ppa updated intel driver , else. did not fix anything.
- i've been searching things 'ubuntu intel display port monitor not detected' , , possibly found people similar problems, no real solution.
so... i'll revise question to: xorg startup log shows dp1 there, , xrandr shows dp1 there, how detect being plugged in?
Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Multimedia Software [ubuntu] minidisplay port almost working on dell xps 15 l521x
Ubuntu
Comments
Post a Comment